10
11
SI-200
SI-200
To start the vacuum cleaner press
on the /AUTO button. The vacuum
cleaner will start in the Intelligent
Power Control (IPC) mode.
To manually
increase or
decrease the
power level, press
the + or – button.
To return to the
Intelligent Power
Control (IPC) mode
from the Manual
mode press once on
the /AUTO button.
Press the “brush”
button to turn
ON/OFF the
Powerclean head or
Powerclean brush.
To turn off the
vacuum cleaner in
the Intelligent Power
Control (IPC) mode,
press once on the /
AUTO button.
2
1
3
4
5
From the electronic control handle
Operation
IMPORTANT! Before using, unwind a sufficient length of cable
and insert the plug into the power socket. A yellow mark on the
power cable shows the ideal cable length. Don’t extend the cable
beyond the yellow mark.
To start the vacuum
cleaner press the
ON/OFF foot pedal.
The vacuum cleaner
will start in Intelligent
Power Control (IPC)
mode. To switch off
the vacuum cleaner
press the ON/OFF
foot pedal.
For short breaks,
insert the nozzle
in the side parking
position, the motor
will then stop
running. If the break
is longer than 5
minutes, the Sauber
Excellence will turn
off automatically for
safety reasons.
To change to manual
mode, press the +/-
buttons.
Set the Automatic
floor head on the
AUTO function.
In this mode the
Automatic floor
head will adapt
to the surface it is
vacuuming by lifting
and lowering the
brush automatically.
To manually set the
carpet function, slide
the button towards
the back, as indicated
on the Automatic floor
head. To manually set
the hard floor function,
slide the button
towards the front,
as indicated on the
Automatic floor head.
From the vacuum cleaner
2
1
5
3
4
Operation
IMPORTANT! Before using, unwind a sufficient length of cable
and insert the plug into the power socket. A yellow mark on the
power cable shows the ideal cable length. Don’t extend the cable
beyond the yellow mark.
