Getting to Know Your
VUE
6
Audio System Operation
While most of the features on your radio
will look familiar, following are some that
may be new.
(Power/Volume):
Press this knob to
turn the system on or off. Turn the knob
to adjust the volume.
(Information):
Press this button to
toggle the radio display between station
frequency and time. If equipped, it will
display additional text information relat-
ed to the current FM-RDS or XM station,
or MP3 song.
(Tune):
Turn this knob to select
radio stations or, when a CD is playing,
to select a track or MP3 file.
Press the knob to display the tone con-
trol (bass/treble) or speaker control
(balance/fade) setting. Turn the knob
to adjust the setting.
(Balance/Fade):
Press this button,
or the Tune knob, to adjust the speaker
control. Adjust the setting using the
SEEK, FWD or REV button.
BAND:
Press this button to switch to
FM1, FM2, AM or XM1 and XM2
(if equipped). With a CD loaded, press
this button to switch between radio and
CD operation.
(Seek/Scan):
Press the right or
left arrow button to go to the next or
previous radio station or, when a CD
is playing, to the next track or MP3
file or the start of the current track or
MP3 file.
To enter the scan mode, press and hold
either arrow button for a few seconds (a
beep will sound). Radio stations will be
scanned. Press either arrow button
again to stop scanning.
(Reverse):
Press and hold this
button to reverse playback quickly within
a track or MP3 file.
(Forward):
Press and hold this
button to advance playback quickly
within a track or MP3 file.
CD/AUX:
Press this button to play a CD
instead of the radio. Press again and the
system will automatically search for an
auxiliary input device such as a portable
audio player. A portable device can be
connected to the auxiliary input located
on the lower-right side of the radio.
RDM (Random):
Press this button to
play CD tracks or MP3 files in random
order. Press again to turn off random
play.
RPT (Repeat):
Press this button to hear
the current CD track over again. Press
again to turn off repeat play.
EQ (Automatic Equalization):
Press
this button to select preset equalization
settings.
CAT (Category) (if equipped):
Press
this button to find XM stations within a
desired category.
Setting the Time
To Set the Time (without Date
Display):
1. Press the (Clock) button until the
hour numbers begin flashing on the
radio display. Press the button again
to adjust the minute numbers.
