Saturn ST-VC7298, Instruction Manual

Page: 3 / 19

4
Do not use for absorbing detergent,
kerosene, glass, needle, cigarette ash,
water, match etc.
The appliance should not be exposed to
heat
Do not vacuum any moist or liquid sub-
stances, Never immerse the appliance in
water.
Unplug the appliance from the mains
supply socket after use and before
every cleaning pull the mains cable, in
order to disconnect the appliance from
the mains.
Do not put any object into openings. Do
not use with any opening blocked. Keep
the appliance free of dust, lint, hair etc.
Do not use the vacuum cleaner without
dust container or dust filter in place.
Do not vacuum any flour, cement etc, in
order to avoid the overloads.
The appliance should only be cleaned
with a dry or damp cloth, it should
never immersed in water.
Do not use any solvents for cleaning
Assembly vacuum cleaner:
5
Connect the hose with the vacuum
cleaner
Insert flexible hose into the air-intake:
Press the knob until it clicks into the
position.
Remove the flexible hose: unplug the
appliance and press the knob at the end
of the hose. Remove it from the air-
intake opening.
Fit the extension tube to be the angled
pipe
Fit the floor brush to the extension tube
Operation:
A yellow mark on power cord shows the
ideal cable length. Do not expend the
cable beyond the red mark.
To rewind the power cord, press the
rewinder pedal with one hand and guide
the cord with the other hand.
Press the power switch to switch the
appliance on.
The suction power can be adjusted with
the sliding control on the angled pipe.
Put the extension tube into the fixing
hook of the appliance when you have a