Saturn ST-VC7283 Manual Download Page 3

Page: 3 / 14

2) Do not put this vacuum cleaner nearby
heat source or other high temperature
objects, or it may lead to the deformation
of the plastic parts

3) Don't bend, trample or pull the hose.
Stop using the appliance when the hose is
broken.

4) When you need clean, repair or will
not use it, please pull the plug out. When
you plug on or off, hold the plug firmly
instead of jerking the wire.

5) When cleaning this vacuum cleaner,
please use the rag with water or neutral
detergent instead of gasoline or banana
oil, or it may cause chapping or fading
on the case.

6) Do not use this vacuum cleaner to
suck cement, gesso, calcimine or other
types of particulate, or it may lead to
block of the dust bag and the filter, and
also may cause damage to the motor. If
the above kinds of the particulate were
sucked into the appliance, please clear
them up immediately.

7) Do not suck hair, big paper balls or
other objects which may block suction
eye, sucker or the tube, otherwise the
motor may be damaged and the case may
deform. If the block does happen, please
stop the machine immediately,
unplugged to do the clearing up.

ASSEMBLY OF THE MAIN PARTS

Nip the 2 buttons on both sides o1 the join
of the tube, insert it into the suction hole on
the main body and lock it.
When knock down the appliance, nip the 2
buttons and pull the tube out.

The connection between the bended tube
and the flexible drawtube or section tube.
Connect the bended tube to the drawtube
(or section tube), then turn them against
each other to lock them firmly. When
dissembling, just turn them in the opposite
direction to the above mentioned.
The connection between the drawtube and
the floor brush
Connect the drawtube into the tube of the
floor brush, then turn them against each
other to lock it firmly. When dissembling,
just turn them in the opposite direction to
the above mentioned.
The connection of draw tube and 2-in-1
brush connect the drawtube into the 2-in-l
floor brush then turn them against each
other to lock it firmly. When dissembling,
just turn them in the opposite direction to
the above mentioned.