Saturn ST-VC0271, Manual

Page: 6 / 46

5
8. Don’t use gasoline and nitrocellulose
lacquer thinner to clean the vacuum
cleaner, otherwise will cause the
enclosure chap and fade. Don’t use the
vacuum cleaner after cleaning at once.
ASSEMBLE
1. Connect the hose and vacuum
cleaner
△
Insert the hose connection
wand into hose connection inlet. Please
check if it is locked with button.
△
After finished, please pull out
the hose connection wand.
2. Connect the handle and the
telescopic tube. Please ring the handle
to the telescopic tube.
3. Adjust the length of the telescopic
tube. Press the telescopic tube button,
and adjust the length.
4.Connect the telescopic tube and the
floor brush. Insert the telescopic tube to
the floor brush.
OPERATION
△
Pull out power cord. The power
cord pulls out to a yellow mark, it is
forbidden to pass a red mark.
△
Rewind power cord. After
working please unplug the appliance.
1. red mark
2. yellow mark
△ ON/OFF
Insert the plug into a socket; press the
ON/OFF button to start working.
△ Speed control
Slip the speed control button.