Saturn ST-VC0256, Manual

Page: 5 / 52

4
6. Don’t place it near the heat source.
II. How to use
1. Preparation
(1) Let the end of the hose insert into
the air intake socket clockwise 90°until
clicking position.
(2) After using, turn the hose with an-
ti-clockwise 90°and pull the end out.
(3) Fit the extension tube to the handle,
tube and tube to floor brush as showing
in the picture.
III. Using the device
Pull out the wire to suitable length, in-
sert the plug into power socket. Then
make the speed control button on MIN,
press the switch to run the machine.
The vacuum cleaner begins to work. The
part, which can adjust wind volume, is
on the handle. The speed control can
adjust the power.
* Attention: Don't extend the cable be-
yond the RED mark
3. Using accessories.
(1) Bristles extended for hard floor.