13
Whether the food is done
- Color and hardness of food help to
determine if it is done, these include:
- Steam coming out from all parts of
food, not just the edge
- Joints of poultry can be moved easily
- Pork or poultry shows no signs of
blood
- Fish is opaque and can be sliced easily
with a fork
Browning dish
When using a browning dish or self-
heating container, always place a heat-
resistant insulator such as a porcelain
plate under it to prevent damage to the
turntable and rotating ring.
Microwave safe plastic wrap
When cooking food with high fat con-
tent, do not allow the plastic wrap come
into contact with food as it may melt
Microwave safe plastic cookware
Some microwave safe plastic cookware
might not be suitable for cooking foods
with high fat and sugar content. Also,
the preheating time specified in the dish
instruction manual must not be exceed-
ed
CLEANING and MAINTENANCE
Microwave oven care
The oven should be cleaned regularly
and any food deposits removed.
1. It is hazardous for anyone other than
a competent person to carry out any
service or repair operation that involves
the removal of a cover which gives pro-
tection against exposure to microwave
energy
2. Remove the power cord from the wall
outlet before cleaning
3. Failure to maintain the oven in a
clean condition could lead to deteriora-
tion of the surface that could adversely
affect the life of the appliance and pos-
sibly result in a hazardous situation
4. The oven should be cleaned regularly
and any food deposits removed
5. Details for cleaning door seals, cavi-
ties and adjacent parts.
6. Never use hard detergent, gasoline,
abrasive powder or metal brush to clean
any part of the appliance
7. Do not remove the waveguide cover
8. When the microwave oven has been
used for a long time, there may be
some strange odors exist in oven, Fol-
lowing 3 methods can get rid of them:
a. Place several lemon slices in a cup,
then heat with high power for 2-3 min.
b. Place a cup of red tea in oven, then
heat with high power.
c. Put some orange peel into oven, and
then heat them with high power for 1
minute.
TIPS for cleaning
Exterior:
Wipe the enclosure with a dampened
soft cloth
Door:
Using a dampened soft cloth, wipe clean
the door and window
Wipe the door seals and adjacent parts
to remove any spill or spatter
Wipe the control panel with a slightly
dampened soft cloth
Interior walls:
Wipe clean the interior surfaces with a
dampened soft cloth
Wipe clean the waveguide cover to re-
move any food splashed
Turntable / Rotation ring / Rotation
axis:
Wash with mild soap water
Rinse with clean water and allow drying
thoroughly
Servicing
Please check the following before calling
for services.
a. Place one cup of water (ap-
prox.150ml)in a glass measure in the
oven and close the door securely. Oven
lamp should go off if the door is closed
properly. Let the oven work for 1 min.
b. Does the oven lamp light?
c. Does the cooling fan work?
(Put your hand over the rear ventilation
openings.)
d. Does the turntable rotate?
(The turntable can rotate clockwise or
counterclockwise. This is quite normal.)
e. Is the water inside the oven hot?
If “NO” is the answer to any of the
above questions, please check your wall
socket and the fuse in your meter box.
If both the wall socket and the fuse are
functioning properly, CONTACT YOUR
NEAREST SERVICE CENTER APPROVED.
SERVICING SAFEGUARDS
MICROWAVE RADIATION!
It is hazardous for anyone, other than a
qualified service technician, to carry out
any service for repairing operation
14
which involves removal of any cover
which gives protection against exposure
to microwave energy.
The temperature of accessible surfaces
may be high when the appliance is op-
erating
The high voltage capacitor remains
charge after disconnection; short the
negative terminal of H. V capacitor to
the oven chassis (use a screwdriver) to
discharge before touching.
During servicing below listed parts are
liable to be removed and give access to
potentials above220V to earth.
1. Magnetron
2. High voltage transformer
3. High voltage capacitor
4. High voltage diode
5. High voltage fuse
The following conditions may cause un-
due microwave exposure during servic-
ing.
Improper fitting of magnetron;
Improper matching of door interlock,
door hinge and door;
Improper fitting of switch support;
Door, door seal or enclosure has been
damaged.
1. if LED displays Err0 during working,
it indicates that sensor has been short
circuit and you need replace it at the
nearest repaired department.
2. if LED displays Err1 during working,
it indicates that sensor has been open
circuit and you need replace it at the
nearest repaired department.
If the door or door seals are damaged,
the oven must not be operated until it
has been repaired by a competent per-
son;
It is hazardous for anyone, other than a
qualified service technician, to carry out
any service for repairing operation
which involves removal of any cover
which gives protection against exposure
to microwave energy.
Liquids or other foods must not be
heated in sealed containers since they
are liable to explode;
Only allow children to use the oven
without supervision when adequate in-
structions have been given so that the
child is able to use the oven in a safe
way and understands the hazards of
improper use
Specification
Power Consumption:
1280 W
Microwave Power:
800 W
Grill Power:
1000 W
Rated Voltage:
220-230 V
Rated Frequency:
50 Hz
Rated Current:
5,8 A
Set
MICROWAVE OVEN……… 1
INSTRUCTION MANUAL WITH
WARRANTY BOOK………… 1
PACKAGE……… …………… 1
ENVIRONMENT FRIENDLY DISPOS-
AL
You can help protect
the environment!
Please remember to
respect the local regu-
lations: hand in the
nonworking electrical
equipment to an ap-
propriate waste dis-
posal center.
The manufacturer re-
serves the right to
change the specifica-
tion and design of goods.
RU
МИКРОВОЛНОВАЯ ПЕЧЬ
Уважаемый покупатель!
Поздравляем Вас с приобретением
изделия торговой марки “Saturn”.
Уверены, что наши изделия будут
верными и надежными помощни-
ками в Вашем домашнем хозяй-
стве.
Не подвергайте устройство резким
перепадам температур. Резкая
смена температуры (например,
внесение устройства с мороза в
теплое помещение) может вы-
звать конденсацию влаги внутри
устройства и нарушить его рабо-
тоспособность при включении.
Устройство должно отстояться в
теплом помещении не менее 1,5
часов.