Saturn SG48-HD Owner'S Manual Download

Page: 1 / 17

OWNER’S MANUAL

Gas Griddle – Heavy Duty

Installation Operation Maintenance

SG48-HD – 48" Heavy Duty Manual Griddle

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

Gas equipment manufactured for Saturn Equipment are for use with the type of gas specified on the rating plate

and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition)

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

WARNING:

Improper installation, adjustment, alteration, service and maintenance can cause property damage,

injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or

servicing this equipment.

Instructions to be followed in the event the user smells gas fumes must be posted in a prominent location in the

installed kitchen area. The information shall be obtained from a local gas supplier.

SATURN EQUIPMENT

www.saturnequipment.com

Summary of Contents for SG48-HD


















Search results

Summary of Contents for SG48-HD

Reviews:

Related manuals for SG48-HD

Brands by name

Popular brands

Saturn SG48-HD, Owner'S Manual

Search results

Summary of Contents for SG48-HD

Reviews:

Related manuals for SG48-HD

Brands by name

Popular brands