15
Express Power Windows
The power
window
switches
are located
on the driv-
er’s door
armrest. In
addition, each passenger door has a
switch for its own window.
Express-Down Window
The driver’s window express-down
switch is labeled AUTO. Press the
switch partway, and the driver’s window
will open a small amount. Press the
switch all the way down and the window
will go all the way down automatically.
To stop the window while it is lowering,
pull up on the switch momentarily.
Power Outside Mirrors
Use the selector
switch located above
the power mirror
four-way control pad
on the driver’s door
to choose either the
left or right outside
mirror. Press one of the arrows on the
control pad to move the mirror in the
desired direction.
See Section 2 of your Owner Manual.
(Mist):
Move the lever down to this
position to turn the wipers on for one
wipe.
(Intermittent):
Move the lever up to
this position to have the wipers adjust
with your vehicle speed. Rotate the con-
trol band to adjust the sensitivity level.
The wipers activate more often as the
band is rotated upward.
(Low):
Move the lever up to this
position to turn the wipers on the Low
setting.
(High):
Move the lever up to this
position to turn the wipers on the High
setting.
(Washer Fluid):
Push the button
on the end of the lever to spray washer
fluid on the windshield.
See Section 3 of your Owner Manual.
Express-Up Window
Pull up the switch partway to partially
raise the driver’s window. Pull up the
switch completely to activate the
express-up feature. To stop the window
as it is rising, pull up or press down
briefly on the switch again.
See Section 2 of your Owner Manual.
Automatic Dimming Rearview
Mirror with Compass (if equipped)
Automatic dimming enables the interior
rearview mirror to sense nighttime glare
from vehicle headlamps and automati-
cally dim to reduce the glare. Automatic
dimming turns on each time the vehicle
is started. Press and hold the
(On/Off) button to turn off the feature
and the green indicator light. Press and
hold the On/Off button again to turn on
the feature and the green indicator light.
Compass Operation and Calibration
Press the On/Off button to turn the
compass on or off.
If the letter C appears in the compass
window, the compass may need to be
reset or calibrated. The compass can be
AURA 2007 A 6/14/06 8:44 AM Page 15
