4
IR-EXT-050C-TX/RX Front Panel
1.
IR receiver:
Connect to a IR receiver cable
2.
IR local output1:
Connect to a IR transmitter cable
3.
IR local output2:
Connect to a IR transmitter cable
4.
+5V power input:
Connect to the +5V power adaptor
IR-EXT-050C-TX/RX Rear Panel
5.
RJ-45 output
: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of another unit.
1.
Connect the IR receiver cables to both TX and RX units.
2.
Connect the IR transmitter cables to both TX and RX units.
3.
Connect one Cat-5/5e/6 cable between TX and RX unit.
4.
Make sure your Cat-5/5e/6 cables are tightly connected and not loose.
5.
Plug the +5V power supply to the power jack on either TX or RX unit.
Hardware Installation
Panel Descriptions
1
3
5
2
4
