Installation requirements VOA
xxxxxxxxxx
G1
Mounting recommendations:
• Minimum pipe diameter: 38mm
(1.5”)
• Process
connection direction:
Vertical: upwards flow with leak detection port facing down.
Horizontal: on the bottom or side with leak detection port facing down.
• Cable entry direction:
from below
Installing 45/G1" Hygienic Welding adapter M548101, refer to datasheet for welding instructions.
Tightening torque: 60 +/- 20 Nm
Replacement o-ring 17x20mm EPDM/FPM/FFPM
Do not put sealing tape or paste on the threaded connection.
VO sensor
G1” Thread
M548101
45.5mm = 1.79”
