Section 5: Troubleshooting
Page 5-8
TH2 Series Operator Manual
5.4 TEST PRINT TROUBLESHOOTING
Chapter provides instruction on special printing to identify and resolve specific print problems.
5.4.1 Hex Dump
Allows the operator to determine if there were problems in the downloading of data. The contents of the print
buffer can be examined using the Hex Dump Mode. In the left column, each line of data received is
numbered. The center column provides the data in hexadecimal format. And, in the right column, the same
data is provided in ASCll format. Refer to
Section 3.8 Advanced Setup Menu
for more details to perform this
activity.
5.4.2 Test label printing
Allows the operator to identify specific problems regarding mechanical performance and setup. The test label
is designed to assist in the identification of print problems.
From the
SYSTEM SETUP
menu, selecting
TEST
and then
Labels
will open the menu with different pre-
defined test labels for selection. Refer to
Section 3.7.4 When System is selected in the SETUP menu
for
more details to perform this activity.
