SATO TC408, User Manual

Page: 31 / 80

31
TC Series - User
’s Manual
Media Calibration
Note :
1. After the media is loaded, please perform media calibration
to calibrate the label sensor before printing. Also perform
media calibration every time after changing media types.
2. Before calibration, be sure media and ribbon (for thermal
transfer printing) have been loaded correctly.
3. The label sensor needs to locate properly to index labels’
gaps/ notches/ holes. For more details, refer to the section,
“
Sensor type ”.
Steps:
1. Turn off the printer
2. Press and hold the PAUSE/CALIBR. Button first, and then turn
on the printer.
3. Once both READY and MEDIA indicators blink, release the
PAUSE/CALIBR. button.
Printer will feeds a short length of blank labels.
4. When the READY and MEDIA indicators stop blinking and
remain illuminated, media calibration is complete!