www.satoamerica.com
13.
When you are finished configuring your
wireless security, press the “FUNCTION” key
and go back to “INTERFACES” again.
14.
Scroll through the list until you see “Printer
Mgmt.” and press “ENTER”. Select “SNC
PORT” and press “ENTER” again.
15.
Make sure your SNC Port is set to “Ethernet”
and press “ENTER”.
16.
Press “FUNCTION” again and scroll to
“INTERFACES” and press “ENTER”. Scroll to
“Host Interface” and press “ENTER”. Change
this option to “ETHERNET”.
17.
Press the “LINE” key 2 times on your printer
and you will be prompted to press “ENTER” to
save your settings or “CANCEL” to continue
without saving settings.
18.
After your settings have been saved, your printer will reboot automatically.
