SATO ARGOX CP-EX Series, User Manual

Page: 34 / 68

CP-EX / CX Series
User Manual
30
Compact Printer Series - User
’s Manual
The following table explains printer controls and indicators
’
functions to help understanding LED indications and printer
status:
Control /
Indicator
Function
Power
Switch

On: turns on normal operation (at
“I”
position)
 Off: turns off power ( at
“O” position)
Note: Turn power off before connecting or
disconnecting cables
Power LED

It will start blinking while “Media Out”,
“Media Gap Not Found” or “Ribbon Out”
has been detected.
 Once printer cutter mode has been
enabled, when Cutter is jammed with paper
or Cutter is not installed, POWER indicator
will blink.

When RS-232 communication error is
detected, POWER indicator will blink.
Ready LED
 When printer is started, the READY
indicator will blink. In Ethernet model, the
READY indicator will blink for several
seconds to wait till Ethernet Card is ready.
 When printer receives data from host PC,
READY indicator will start blinking.
 READY indicator will blink when printing is
paused.

It will start blinking while “Media Out”,