5
2. Notes on Use
To ensure correct use of this device, observe the following items.
-
Because this device is a precision measuring instrument, be careful not to drop it or apply vibration
or shock.
-
Do not disassemble or modify this device. Doing so may result in failure.
-
Do not use this device in a place exposed to direct sunlight or near heating equipment. Doing so may
not only prevent correct measurement but will also cause deformation and discoloring of the casing.
-
The operating temperature range for this device is 0 to 50°C at the humidity of 80% RH or less.
Using the device outside the range will result in failure.
-
Do not use this unit in an environment where electrical noise is generated. Doing so may result in
unstable display or larger errors.
-
Never allow the device to become wet, as it is not waterproof. When using the device outdoors,
protect the main unit and sensor probe from rain. If the device gets wet, problems may occur.
-
Do not modify, forcibly pull, bend, or bundle the sensor cord. Doing so may break the cord. Also,
placing a heavy object on the cord or heating it will damage it.
-
Always use this device within the measurement range. Using it outside the permissible
measurement range will damage the vane (propeller).
-
If this device is not going to be used for a long time, remove the battery. Otherwise, battery fluid may
leak, resulting in failure.
-
Do not dispose of used batteries into a fire.
-
Keep batteries out of children’s reach. If you swallow a battery accidentally, consult a doctor
immediately.
-
For environmental conservation purposes, dispose of used batteries according to local government
laws and regulations.
-
Do not wash or wipe this device with alcohol, thinner, or other organic solvent. If the unit becomes
dirty, wipe it with a tightly-wrung gauze or a soft cloth that has been dipped in warm water with
neutral detergent.
-
When using the AC adapter (option), never connect or disconnect the power cord with wet hands.
Doing so may result in electric shock, electric short, or power disconnection.
-
For repair or calibration, contact the store from which the device was purchased or our service
network.
3. How to Install a Battery
Installing a Battery
(1) Remove the set screw on the battery lid using a Phillips screwdriver and remove the lid.
(2) Install a 9-V (6F22) battery.
