Satlink WS-8901U, User Manual, Page: 6 / 8

5
English
3. THE MENU OSD INSTRUCTION
Modulator will initialize to the boot interface after power on, and press OK
into the main menu.
• OSD Language: press
AB
key to change lan-
guage.
• Country : press
AB
key to enter country list, and
use
YZ
key to select a country, then press OK
to confirm.
• Channel Name : press
AB
key to change the
channel number.
• Frequency : frequency setting in range of 50~860MHz, press
AB
key to
move cursor and press
YZ
key to change numbers.
• BandWidth : press
AB
key to select bandwidth
of 6/7/8MHz.
• Carrier : carrier setting, press
AB
key to select
2K or 8K.
• Modulate : modulation mode setting, press
AB
key to select QPSK, 16QAM or 64QAM.
• FEC : FEC code rate setting, press
A B
key to se-
lect 1/2, 2/3, 3/4, 5/6 or 7/8.
• Guard Interval : guard interval setting, press
AB
key
to select 1/4, 1/8, 1/16 or 1/32.
• RF Output Level : RF output level setting,
press
AB
key to change value in range of
70~100dBuV.
• Signal Source : press
AB
key to choose HD or
CVBS.
• Key Tone : press
AB
key to ON/OFF key tone.
• LCN : use
YZAB
key to edit logical channel
number.
• Program Name : use
YZAB
key to edit pro-
gram name of current frequency point.
• Service Provider : use
YZAB
key to edit opera-
tor name.
• Factory Set : press OK to confirm factory reset.
Note: The operation would be only valid under current one route modulator.