5
English
3. THE MENU OSD INSTRUCTION
Modulator will initialize to the boot interface after
power on, and press
OK
into the main menu.
There are 5 options in main menu:
• RF1 System Set
• Channel 1 Setup
• Channel 2 Setup
• Channel 3 Setup
• Channel 4 Setup
3.1 RF1 SYSTEM SET
•
Language:
press
AB
key to change OSD
language.
•
Country
: press
AB
key to enter country list, and
use
YZ
key to select a country, then press
OK
to confirm.
•
Channel
: press
AB
key to change the channel
number.
•
Freq
: frequency setting in range of 50~860MHz, press
AB
key to move
cursor and press
YZ
key to change numbers.
•
BandWidth
: press
AB
key to select bandwidth of 6/7/8MHz.
•
Carrier
: carrier setting, press
AB
key to select
2K or 8K.
•
Modulate
: modulation mode setting, press
AB
key to select QPSK, 16QAM or 64QAM.
•
FEC
: FEC code rate setting, press
A B
key to
select 1/2, 2/3, 3/4, 5/6 or 7/8.
•
Guard Interval
: guard interval setting, press
AB
key to select 1/4, 1/8, 1/16 or 1/32.
•
RF Level
: RF output level setting, press
AB
key to change value in range of
