Satlink FB250+, User / Instellation Manual

Page: 28 / 33

FB 250+ Installation Manual
Page 28 of 33
Note:
The Router settings cannot be changed while the Data connection is active. The Data
session must be first disconnected.
Click “ Always On (Auto PDP Context Activation)” checkbox if it is required to get the
standard IP Data connection to be reconnected automatically in the event the connection is
disconnected without user intervention, i.e. antenna blockage, etc.
Click “ Update ” to allow the selection to take effect.
• Click “ Refresh ” to query the current mode.
Click “ Connection ”
To activate the PDP context, click “ Activate Default Profile ”
After about 30 to 40 seconds, the data connection will be activated with a notification of the
public IP address assigned to the active data connection. An user may now browse the
internet, do file transfer (FTP) or run any IP-based application services.
To disconnect the data connection, click “
Disconnect ”.
The PDP context will be deactivated.