5
English
3. THE MENU OSD INSTRUCTION
Modulator will initialize to the main interface after power on, and press OK
into the main menu.
•
OSD Language:
press
AB
key to change lan-
guage.
•
Country
: press
AB
key to enter country list,
and use
YZ
key to select a country, then
press OK to confirm.
•
Channel Name
: press
AB
key to change the
channel number.
•
Frequency
: frequency setting in range of 50~860MHz, press
AB
key to
move cursor and press
YZ
key to change numbers.
•
BandWidth
: press
AB
key to select bandwidth
of 6/7/8MHz.
•
Carrier
: carrier setting, press
AB
key to select
2K or 8K.
•
Modulate
: modulation mode setting, press
AB
key to select QPSK, 16QAM or 64QAM.
•
FEC
: FEC code rate setting, press
A B
key to select 1/2, 2/3, 3/4, 5/6 or 7/8.
•
Guard Interval
: guard interval setting, press
AB
key
to select 1/4, 1/8, 1/16 or 1/32.
•
RF Output Level
: RF output level setting,
press
AB
key to change value in range of
70~100dBuV.
•
Signal Source
: press
AB
key to choose HDMI
or CVBS.
•
Key Tone
: press
AB
key to ON/OFF key tone.
•
LCN
: use
YZAB
key to edit logical channel
number.
•
Program Name
: use
YZAB
key to edit program name of current frequen-
cy point.
•
Service Provider
: use
YZAB
key to edit operator name. If your signal
source has been selected “HDMI”, you must input “HDCP“ for HDCP support.
•
Factory Set
: press OK to confirm factory reset.