SatKing SK-3200, User Manual

Page: 6 / 9

6 7
English
then use
YZ
key to edit TP frequency.
Move the cursor to SR, we can press
OK
, then use
YZ
key to
edit Symbol rate.
Move the cursor to POL, we can press
A B
key to change ver-
tical or horizontal of polarization.
When all of settings are ok, we can check the LNB signal.
3.3 TOOLS
Press
YZ
key to move the cursor,
then press OK to select the op-
tion. Press
YZ
key to input value,
and press
A B
key to set east/
west or north/south. The bottom
of the screen can get the param-
eters of the satellite.
3.4 SAT MANAGER
• Add Satellite
• Edit Satellite
• Delete Satellite
Add Satellite: the setting refer to Antenna Setup.
Edit Satellite: press
A B
key to page up /down; then press
YZ
key to select the satellite; press
OK
to edit satellite setting, re-
fer to Antenna Setup.
Delete Satellite: refer to Edit Satellite then press
OK
to delete
satellite.
• Frequency: Frequency of the current transponder, input the
value by using the
YZ
keys.
• Symbrate: symbol rate of the current transponder, input the
value by using the
YZ
keys.
• Polarity: press
A B
key to change vertical or horizontal of
polarization.
• 22K: press
A B
key to switch
the 22K tone; if you select uni-
versal type, the 22K setting is
AUTO.
• DiSEqC Mode: press
A B
key
to set the type of port as DiS-
EqC1.0/1.1 or Unicable.
• DisEqc type & Input: If we select DisEqc 1.0/1.1, we can press
A B
key to set the port number. If select Unicable, we can
press
A B
key to select IF Channel, and use
YZ
key to input
Center Frequency.
• LNB Power: press
A B
key to switch LNB power on /off.
When all of settings are ok, press
RETURN
, then press
OK
for
save the edit.
3.2 SIGNAL SCAN
Move the cursor to SAT, we can
press
A B
key into satellite list,
then press
YZ
key to select sat-
ellite you want.
Move the cursor to F, we can
press
A B
key into TP list, then
press
YZ
key to select TP you
want. We can also press
OK
,