6
In the case that Bluetooth GPS is enabled in
Setup
>
BT ON
and connection type is set to
GPS in
Setup>BT menu>BT GPS
, the GPS satellite icon appears when valid GPS data are
received, see Figure 2-6. In the case of single mode measurement with GPS enabled, this icon
appears after measurement, indicating that the actual measurement can be saved with the
actual and valid GPS data. Otherwise valid and actual GPS data has not been received from
GPS and measurement can not be saved with GPS data.
Figure 2-6 GPS satellite icon
2.6
Menu
KM-7 menu has four levels:
Figure 2-7 KM-7 menu structure
2.6.1 Introduction screen
The KM-7 introduction screen is visible for ca 3 seconds after the instrument has been
switched on. Then the KM-7 goes to the main menu. The introduction screen can be left by
pressing any button as well.
2.6.2 Main menu
The main menu is composed of three items. Real time is displayed at the bottom line.
MEASURE PIN
MEMORY
SETUP
12:04
Figure 2-8 Main menu