19
5 THE KMdata DESCRIPTION
The KMdata program consists of three main windows/tabs and About tab.
The Data tab window, see Figure 5-1, is the first window that appears after the program
has started. Four tabs are to be found at the top left side of the main window.
Data
tab
provides access to a stored data.
Setup
tab incorporates all program setups and the KM-7
firmware update guide.
Scan Remote
tab, which is accessible only if the KMdata is connected
with KM-7, is used to acquire data from KM-7 in the
Scan Remote
mode.
About
tab shows
information about program.
The program window is divided to three main regions (except for the
Setup
tab). The
command banner is to be found under tabs, the status banner at the bottom of the window and
the main window of the selected tab is located in the middle of the program window.
The status banner is visible on all tabs. On the left side of status banner, the KM-7 serial
number is displayed. The progress bar is visible only when an action is taken e.g. transfering
data from KM-7, loading huge amount of data from the database to the table, etc.
Figure 5-1 KMdata main window
On the right side of status banner, a connection status icon can be seen.
Figure 5-2 Connection status icons: disconnected, Bluetooth connection, USB connection