14
4 THE KMdata COMMUNICATION PROGRAM
The KMdata communication program allows data transfer from KM-7 to PC. The
transferred data are stored in the internal program database. In the
Scan remote
mode,
KMdata allows direct acquisition of measurements from the KM-7. The data can be accessed,
displayed, sorted and exported.
The built-in tree xml database can be used in other programs for a further data
processing.
4.1
The KMdata installation
Run
Setup
from the installation CD, if it does not start automatically. This installation
program installs the KMdata program and all components to the PC. The USB drivers are
installed as well. To install USB drivers, you windows account must have administration
privileges.
After program installation starts, you may see following screen, Figure 4-1, if the .Net
Framework is not installed on you PC.
Figure 4-1 .NET framework installation window
After accepting the license agreement, .Net framework is installed.
Then the KMdata installation guide starts, see Figure 42.