Satir UPC160, User Manual

Page: 5 / 26

2
Failure to do so may result in fire or electrical shock. Immediately
turn the IR camera’s power off, remove the IR camera battery or
unplug the power cord from the power outlet.
8
、
Do not use substances containing alcohol, benzene, thinners or
other flammable substances to clean or main the IR camera. The
use of these substances may lead to fire.
9
、
Do not handle the power cord if your hands are wet Handling it with
wet hands may lead to electrical shock. When unplugging the cord,
ensure that you hold the solid portion of the plug. Pulling on the
flexible portion of the cord may damage or expose the wire and
insulation, creating the potential for fires and electrical shocks.
10
、
Do not install camera to the unstable wall and support arm, or
it could lead to injury of people and camera.
11
、
Please contact us immediately if you meet situations as
follows:
a. The power or control line damaged.
b. Using the wrong voltage and type of power.
c. Cause damage when dropping the camera.
d. The camera occurs functional problems.
e. The camera still working wrong after operating properly as user
manual.
Warning: Do not aim the IR camera directly into the sun or at other
intense heat source, which could damage the detector of the IR
camera.
1.1.2
Caution
1
、
Please avoid strong vibration, heavy pressure and soaking. Or it
would damage the camera.
2
、
If you want to change the location of the installed camera, please
make sure turn off the power before start.
3
、
Please install camera in a well-ventilated circumstance.
4
、
If the camera work abnormally, please contact us, do not dissemble
or alter camera in any ways. Manufacturer has no responsibility for