SatX/SE300—
E1/T1 Card Configuration
Proprietary and Confidential
149
For example, in modems with multiple E1/T1 interface (2, 3, 4XE1), the bundle ID number should be
32*N+1, where N=0...3. Thus E1 (#3) bundle ID must be 65.
Browsing between the entered channel ID’s can be done by clicking the
Forward
and
Backwards
buttons in
Configuration > Connection > Bundle Connection
menu.
F
IGURE
123:
B
UNDLE
C
ONNECTION
S
CREEN
The DSO bundle section (
Configuration > Connection > DS0 Bundle
) for each bundle ID
needs to be updated with the corresponding time slot as shown in Figure 124.
F
IGURE
124:
U
PDATING
B
UNDLE
ID
S
13.3.1
E1 Framed Data Configuration
The following table depicts the different configurations needed on both ends.