SATEL
VERSA Plus LTE
23
Fig. 23. Connecting analog telephone line to the control panel.
5.10 Connecting the Ethernet network
The device is designed to be used only in the local area networks (LAN). It must
not be connected directly to the public computer network (MAN, WAN). For
establishing connection with public networks, use a router or xDSL modem.
To connect the control panel to the Ethernet network, use a 100Base-TX standard compliant
cable (identical to that used for connecting computers to the network). The cable must be
terminated with a RJ-45 plug.
5.11 Connecting the INT-AVT terminal
One INT-AVT terminal (manufactured after 1 December 2014), provided with a microphone
and a speaker, can be connected to the control panel. Owing to the terminal, the system
users will be able, after establishing telephone connection with the control panel, to use the
listen-in feature and talk with the people staying inside the protected premises.
5.11.1 Mounting the INT-AVT terminal
When selecting the installation place, bear in mind that curtains, drapes, upholstery, acoustic
tiles, etc. absorb sound and, as a result, make it difficult, if not impossible, to use the listen-in
feature. It is not advisable to install the terminal in the vicinity of equipment which generates
noise during operation (e.g. fans, air conditioners, refrigerators).
1. Remove the screw, lift the enclosure cover and detach it (see Fig. 24). The cover will still
be connected to the base by the speaker wires.
When opening the INT-AVT terminal enclosure be careful not to rip off the
speaker attached to the base.
Any changes in the construction of the INT-AVT terminal may result in
malfunctioning of the device.
Summary of Contents for VERSA Plus LTE
Page 40: ......
