SLR6 User Guide
Version 1.0
16
Handshaking
Handshaking lines apply to the DATA-
port
CTS
TX buffer state
Clear to send, TX buffer state
CD
not supported
RSSI- threshold, Data on channel,
Always ON
RTS
Ignored
Ignored, Flow Control, Reception Control
Pause length
3 bytes
3 … 255
Additional setup
Error correction, FEC
OFF
ON / OFF
Error check
OFF
OFF, CRC8Partial, CRC8Full, CRC16Full
Repeater mode
OFF
ON / OFF
SL-commands
ON
ON / OFF
TX delay
0
0 ... 65535 ms
Use channel list
OFF
ON / OFF
Power save mode
OFF
ON / OFF
Add RSSI to data
OFF
ON / OFF
8.2
Configuration
The configuration of SLR6 radio modem can be modified by connecting the modem to the PC
and using SATEL Configuration Manager (CM). Programming is done using the serial port of the
modem. The serial port settings must match between SLR6 and Configuration manager.
When the SLR6 is set to Service / Programming Mode, the modem uses fixed settings 38400 bps,
N, 8, 1 (data speed 38400 bps, no parity, 8 data bits and 1 stop bit).
