background image

Version 1.0 

 3 

RESTRICTION ON USE 

 

SATELLINE-3AS SLR5 radio modem has been designed to operate on frequency ranges, the 
exact use of which differs from one region and/or country to another. The user of a radio 
modem must take care that the device is not operated without the permission of the local 
authorities on frequencies other than those specifically reserved and intended for use without a 
specific permit.  
 

SATELLINE-3AS SLR5

 (403…473 MHz) is allowed to be used in the following countries, either 

on licence free channels or on channels where the operation requires a licence. More detailed 
information is available at the local frequency management authority. 
 
Countries*:   AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, 

NL, NO, PL, PT, RO, RU, SK, SI, ES, SE, CH, GB and US. 

 

 

  

 

WARNING!

 Users of SATELLINE-3AS SLRx radio modem modules in North America should be 

aware, that due to the allocation of the frequency band 406.0 – 406.1 MHz for government use 
only, the use of radio modem on this frequency band without a proper permit is strictly 
forbidden.  
 

 

* codes of the countries follow the ISO 3166-1-Alpha-2 standard 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SATELLINE-3AS SLR5












Reviews: