Satel SATEL-TR49 SnapOn, Integration Manual, Page: 62 / 65

SATEL-TR49
Integration Guide, V 1.7
61
Slave
Security Boolean 0 - 1 0: On
1: Off SL~E=M1,I12,A<Slave Security>
<RF Data Rate> = 2 (=High) or 3 (=Normal)
RTS To CTS Uint8 0 - 2 0: Disabled
1: Enabled SL~E=M1,I13,A<RTS To CTS>
<RTS To CTS> = 0 (=Disabled) or 1
(=Enabled)
Retry
Timeout Uint8 8 - 255 8 - 255: Counter value when
connection is dropped
off if data is not received. SL~E=M1,I14,A<Retry Timeout>
<Retry Timeout> = [8-255]
Repeaters Boolean 0: Disabled
1: Enabled SL~E=M1,I15,A<Repeaters>
<Repeaters> = 0 (=Disabled) or 1
(=Enabled)
Master
Packet
Repeat Uint8 0 - 9 0 - 9: Defines how many times
master will send packets SL~E=M1,I16,A<Master Packet Repeat>
<Master Packet Repeat> = [0-9]
Max Slave
Retry Uint8 0 - 9 0 - 9: Defines how many times
slave try to transmit data
if ack is not received SL~E=M1,I17,A<Max Slave Retry>
<Max Slave Retry> = [0-9]
Retry Odds Uint8 0 - 9 0 - 9: Defines a random base
when slave is trying to
resend data to master if Max
Slave Retry count is
reached. Value 0 means that
the slave's data
buffer is purged after Max
Slave Retry count is reached SL~E=M1,I18,A<Retry Odds>
<Retry Odds> = [0-9]
Repeater
Frequency Boolean 0 - 1 0: Disabled
1: Enabled SL~E=M1,I19,A<Repeater Frequency>
<Repeater Frequency> = 0 (=Disabled) or
1 (=Enabled)
Network ID Uint16 0 - 4095 0 - 4095: Network ID for
multipoint networks.
Network ID 255 = Call Book
Mode
SL~E=M1,I20,A<Network ID>
<Network ID> = [0-4095]
Note: Network ID 255 = Call Book Mode
Slave /
Repeater Boolean 0: Disabled
1: Enabled SL~E=M1,I21,A<Slave/Repeater>
<Slave/Repeater> = 0 (=Disabled) or 1
(=Enabled)
TX Subnet Uint8 0 - 9, A -
F 0: Roaming
1 - E: Subnet ID
F: Disabled SL~E=M1,I22,A<TX Subnet>
<TX Subnet> = [0-9, A-F] as presented on
the left
RX Subnet Uint8 0 - 9, A -
F 0: Roaming
1 - E: Subnet ID
F: Disabled SL~E=M1,I23,A<RX Subnet>
<RX Subnet> = [0-9, A-F] as presented on
the left
Serial port
settings GET: SL%B?
SET: SL%B=