- 1 -
RX1K
RADIO CONTROLLER
®
Program Version 1.1
rx1k_e 06/04
The one-channel RX1K radio controller has been designed for application in the security systems, where
it can serve control functions for arming partitions, and bypassing partitions or detectors, or even panic
buttons. Owing to its expanded configuration options
,
it can be successfully used in all situations
requiring the wireless control.
The radio controller is fitted with an electromagnetic relay which provides direct control of the electric
equipment operation. To perform the control function (as transmitters), two- or four-button remote
controls are designed. High resistance of the remote controls to environmental changes ensures a stable
performance and a high comfort of the controller use. The construction, based on the Microchip
Technology Inc. component parts, which use the dynamically changed K
EE
L
OQ
®
code for the
transmission between transmitter and receiver, ensures both the safety of use and the resistance to
spurious control signals coming from other equipment. The one-channel controller is capable of working
together with 40 remote controls. It can only handle the SATEL remote controls.
Interfacing with the security systems is facilitated by the inputs informing of the system status, which
make for an easy arrangement of the signaling of arming/disarming and clearing alarm.
WARNINGS
The control panel main board contains electronic components sensitive to electric charges. Prior to
installation, these charges must be removed. During installation, avoid touching any elements on the
control panel main board.
Making any construction changes or unauthorized repairs is prohibited. This applies, in particular, to
modification of assemblies and components.
It is recommended that in the remote controls the producer’s required battery should be used.
CAUTION! The old batteries must not be thrown away, but disposed of as required by the
existing regulations (European Directives 91/157/EEC and 83/86/EEC).
HOOKUP DESCRIPTION
Figure 1.
View of the one-channel controller board.
DESCRIPTION OF TERMINALS:
AR – input of signal indicating the security system armed mode
AL
– alarm signal input
LV
– output of remote control low battery signal (OC)
SS
– signaling device control output (OC)
+12V – supply voltage input (direct voltage 9 to 16V)
AR AL. LV SS+12V COM C NC NO
TMP
D1
PROGRAM
ANTENNA
RECEIVER
ANTI-TAMPERING
CONTACT
ABC
JUMPER
