Satel RX-2K, Manual

Page: 1 / 8

RX-2K
•
RX-4K
RADIO REMOTE CONTROLLER
rx24k_en 04/18
The RX-2K / RX-4K controller allows you to use keyfobs to control devices connected to relay
outputs. Because it is designed for use with the alarm system, it has inputs supervising the
state of the alarm system, as well as an output for indication of arming / disarming / alarm
clearing.
1. Features

2 [RX-2K] or 4 [RX-4K] control channels.

Support for up to 340 keyfobs.

Transmissions secured by KeeLoq code hopping.

Configurable from a computer with DLOAD10 program installed.

2 [RX-2K] or 4 [RX-4K] relay outputs.

2 OC type outputs:

indication of low keyfob battery,

indication of arming / disarming / alarm clearing in the alarm system.

2 inputs to supervise the state of the alarm system:

armed mode information,

alarm information.

LED indicator.

Tamper switch activated by cover removal.
2. Electronics board
Fig. 1. Electronics board of the RX-4K controller.
bicolor LED indicator:
ON in green – power OK,
ON in red – transmission has been received from keyfob,