SATEL
ROP-100/EU
● ROP-101/EU
3
3. Screw the cables to the corresponding terminals. Fig. 6 shows a typical connection of the
manual call points to the fire alarm control panel.
Note: The ROP-BT base, provided with dedicated terminals for screen connection, is
available in the product range offered by SATEL. The ROP-BT base can be used
instead of the one included in the manual call point delivery set.
4. Use the key to remove the enclosure cover (Fig. 3).
5. Screw the enclosure upper part to the base.
6. Replace the cover.
4. Maintenance
The manual call points should be subject to regular checks to ensure they are working
correctly. Periodic checks should be conducted at least every six months. In order to test the
manual call point, use the key, which must be inserted into the hole located in the lower part
of the MCP (Fig. 4). Inserting the key should initiate an alarm.
