Satel INTEGRA Plus, User Manual

Page: 32 / 48

30 User Manual SATEL
2. Press in turn the 4 and 1 keys. The list of zones will be displayed. There is an additional
symbol in the upper right-hand corner of the display to inform you about the given zone
status:
– the zone is not bypassed,
– the zone is inhibited,
– the zone is isolated.
3. Using the

and

keys, find in the list the zone which is to be inhibited (or press 0 key
and enter the zone number).
4. Press one of the digit keys 1 to 9 until the symbol appears in the upper right-hand
corner of the display.
5. Repeat the steps 3 and 4 for the next zones which are to be inhibited.
6. Press the key. A message will inform you that the zones are inhibited.
Having started the I
NHIBIT
function (step 2), you can press the

or

key to switch
over the keypad to the graphic programming mode (see: “Selection from the multiple-
choice list” p. 15).
5.10.2 Zone isolating
The zones can be isolated by the users having the Z
ONES BYPASSING
and Z
ONE ISOLATION
rights. The isolated zone will remain bypassed until unbypassed by the user.
1. Enter the code and confirm with the key.
2. Press in turn the 4 and 2 keys. The list of zones will be displayed. There is an additional
symbol in the upper right-hand corner of the display to inform you about the given zone
status:
– the zone is not bypassed,
– the zone is inhibited,
– the zone is isolated.
3. Using the  and  keys, find in the list the zone which is to be isolated (or press 0 key
and enter the zone number).
4. Press one of the digit keys 1 to 9 until the symbol appears in the upper right-hand
corner of the display.
5. Repeat the steps 3 and 4 for the next zones which are to be isolated.
6. Press the key. A message will inform you that the zones are isolated.
Having started the I
SOLATE
function (step 2), you can press the

or

key to switch
over the keypad to the graphic programming mode (see: “Selection from the multiple-
choice list”
p. 15).
5.10.3 Unbypassing
The zones can be unbypassed by the users having the Z
ONES BYPASSING
right. Proceed in
the same way as when inhibiting or isolating the zones (steps 1-3), but the symbol must be
shown in the upper right-hand corner of the display, if the zone is to be unbypassed upon
pressing the key.