4 INT-RS
SATEL
2. Start the
"LCD keypads identification"
function in LCD keypad
(
S
ERVICE MODE
S
TRUCTURE
H
ARDWARE
I
DENTIFICATION
LCD
KEYPADS ID
.
).
Note: The 16-bit identification number in the interface memory makes it possible to
check the interface availability in the system. Substitution of the device with
another one (even having the same address set on the DIP switches) without
repeating the identification will trigger alarm signal.
3. Using the LCD keypad or computer (
D
LOAD
X
program), program the device, as
required.
4. Save the interface settings to the control panel memory.
4. Specifications
Supply voltage ......................................................................................... 12 V DC ±15%
Standby current consumption................................................................................35 mA
Maximum current consumption .............................................................................35 mA
Electronics board dimensions......................................................................... 57x80 mm
Environmental class ...................................................................................................... II
Working temperature range ....................................................................-10 °C...+55 °C
Weight ...................................................................................................................... 39 g
The declaration of conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o. • ul. Schuberta 79 • 80-172 Gda
ń
sk • POLAND
tel. + 48 58 320 94 00
•
www.satel.eu
