®
Ethernet Module
ETHM-1
ethm1_e 05/07
The ETHM-1 Ethernet Module is a TCP/IP server. It enables the INTEGRA series control
panels (program version 1.03 or later) to be operated via the Ethernet network. Data
transmission in the network is coded by means of an advanced algorithm based on 192-bit
key. The control panels can be operated via the Ethernet network with the use of PC
computers or mobile phones.
When using the computer, the control panel can be operated from the D
LOAD
X service
program, G
UARD
X administrator program, as well as an Internet browser supporting the J
AVA
applications. The mobile phone uses a special J
AVA
application to operate the control panel.
Note:
The module enables only one user to be connected at a time. The next users will
receive a message on busy status of the server.
The module with firmware version 1.02 or later provides an option for the INTEGRA series
control panels (program version 1.04 and next) to perform monitoring via the Ethernet
network.
This manual refers to the ETHM-1 module with firmware version 1.02. Replacement of the
module firmware is possible by means of the EthmFlash program, available on the website
www.satel.pl
1. Description of electronics board
Fig. 1. Schematic view of electronics board of ETHM-1 Ethernet module.
Legend:
1 –
RS-232
port
– enables the module to be connected to the control panel RS-232 port, so
that the panel can be controlled via the Ethernet by means of the D
LOAD
X program.
Additionally, it makes possible to replace the module firmware. Connect the port to the
