SATEL Compact-4BT User Guide
Version 1.5B
20
8.2
Configuration
The configuration of SATEL Compact-4BT radio modem can be modified by connecting the
modem to the PC and using SATEL Configuration Manager (CM). Programming is done using RS-
232 or USB port. The RS-232 serial port settings must match between SATEL Compact-4BT and
Configuration Manager. SATEL terminal program SaTerm supports also SATEL Compact-4BT
configuration.
8.2.1
Controlling the device with Configuration Manager
SATEL Configuration Manager (CM) is available also for SATELLINE-M3-TR1, -EASy, -EASy Pro,
-M3-R3, -M3-TR3, -M3-TR4, -M3-TR8, -EASy 869, -M3-TR1 869, Compact-Proof, and EASy-
Proof products. The program makes it possible to edit the modem settings and update the
firmware.
QuickStart
Preliminary settings:
1.
Save the SATEL Configuration Manager,
SATEL_Configuration_Manager.help and the SatelNMS.ID
to the same directory. If available, save also the Firmware to
the same directory.
2.
Connect the modem module to the PC using either YC0401
DC/USB or YC0400 DC/RS232 or Bluetooth.
3.
Connect supply power to the module. Check that you have
the correct Supply Voltage.
4.
Open the SATEL Configuration Manager program. Check from the “Program Preferences”
tab, that you have selected correct COM-port number and that the Baud rate is set to 9600
(when programming adapter is used, and according to the modem serial port data rate,
when the direct data cable is used.)
5.
To establish connection between the modem and the PC, press the blue Connect tab. To get
the radio modem info, press blue Read Settings tab. Now all the information from the modem
is available.
6.
Changed serial interface parameters are taken in use immediately.
For more information about Configuration Manager can be found from User Guide.
www.satel.com
