manualshive.com logo in svg

Satel CA-64 S, Manual, Page: 8 / 8

Share
Download
Satel CA-64 S Manual Download Page 8

8

 

Partition keypad 

CA-64 S   SATEL 

 

events from being entered several times into the control panel memory. This option 
allows the blocking function to be disabled. 

♦

  Confirming – option determining the way of control panel communication with the partition 

keypad user:  

ƒ

  No – function of option confirming on keypad disabled 

ƒ

  Sound – the partition keypad generates the sounds described above in this manual, 

section “SIGNALLING”.  

ƒ

  Backlight – key backlit blinking is used instead of audible signalling, as described in this 

manual section “SIGNALLING”.     

♦

  Backlight – defines the way of operation of key backlit:  

ƒ

  No – key backlit is off.  

ƒ

  Auto – key backlit is switched on automatically after pressing any key, this function has 

additional options:  

à

  No – key backlit is switched on only after pressing any key,  

à

  Zone violation: - key backlit is switched on also when the zone with the number 

entered in the field next to the option name has been violated,  

à

  Entry delay, part.: - key backlit is also switched on when the entry delay counting 

down is started in the partition with the number entered in the field next to the option 
name.  

NOTE:    Automatic keypad backlit is active for approximately 40 seconds, counting from 

the moment of its activation or from the last pressing of any key.  

ƒ

  Permanent - key backlit is switched on permanently.  

TECHNICAL DATA  

Supply voltage  ............................................................................................. DC 10,5V...14V 
Maximum current consumption   .................................................................................. 50mA 
Maximum voltage switched over by the relay  ................................................................. 24V 
Maximum current switched over by the relay .................................................................... 2A 
Dimensions .................................................................................................. 80x145x26 mm 

 

 

Latest EC declaration of conformity and product approval certificates can 

be downloaded from our Web site   www.satel.pl 

 

 
 
 
 
 

SATEL sp. z o.o. 

ul. Schuberta 79 

80-

172 Gda

ń

sk

 

POLAND 

tel. + 48 58 320 94 00 

[email protected] 

www.satel.pl 

 

Summary of Contents for CA-64 S









Reviews:

No comments