Cyclone Micro 2 Multimedia Player
Page 11.
Version 0.7
Basic
Basic
Basic
Basic Setup:
Setup:
Setup:
Setup:
To setup up your media player you will need to connect it to your TV set and
supply power to the Cyclone Micro 2.
You may also wish to connect the
Cyclone Micro 2 to an external hard drive or plug in a pen drive.
First of all examine the back of your TV set and locate its AV ports. Please
make sure you have the correct cables for your chosen setup.
Connecting
Connecting
Connecting
Connecting Power:
Power:
Power:
Power:
Please ensure the power socket switch is in the off position before plugging in
the power adapter to the wall.
Connect the power adapter (supplied) to the back of your Cyclone Micro 2
and plug the power into the power socket. You will notice the standby LED is
now lit.
AV
AV
AV
AV Cable:
Cable:
Cable:
Cable:
Connecting the Cyclone Micro 2 to your TV will allow you to view multimedia
in standard definition.
Using the AV lead (supplied), connect the 3.5mm jack into the 3.5mm
composite port on the back of the Cyclone Micro 2. On the other end of the
cable plug the red, yellow and white connectors into the corresponding input
ports of your TV.
Switch on your TV and select AV mode, if required.
Press the STANDBY button on the remote control to switch on the Cyclone
Micro 2.
