18
5 Setup on the RDM
Setup can be performed via the RDM or
PComTest
software.
PComTest
is supplied on a disk which includes setup
instructions
1
.
The functions of the RDM keys in the
setup mode
are shown
below:
Figure
5-1 RDM Panel - Setup Mode
Setup Procedure
1. Press
SELECT
to enter
setup mode
.
2a. Press
SELECT
again to go to
SEE
(for viewing only),
or
2b
. P
ress
SELECT
again to go to
CHG
(for editing setup)
3. Press
ENTER
. If a password is required, use
▲
▼
to input the
first digit and press
SELECT
to advance to next digit. After all
4 digits are input, press
ENTER
.
4. Press
SELECT
to choose the menu; press
ENTER
.
1
All parameters may be set up via either the RDM or
PComTest
. It is
recommended to use the RDM for Basic and Communications
parameters setup, and to use
PComTest
for setup of all other menus.
Menu
Paramete
r
Parameter value
To enter a menu/store a value
To move between windows
To return to previous level or
quit without saving changes
To scroll through parameter
lists or values
