ii
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on
the instrument in respect of faulty workmanship or parts from date of
dispatch from the distributor. In all cases, this warranty is valid for 36
months from the date of production. This warranty is on a return to factory
basis.
The manufacturer does not accept liability for any damage caused by
instrument malfunction. The manufacturer accepts no responsibility for
the suitability of the instrument to the application for which it was
purchased.
Failure to install, set up or operate the instrument according to the
instructions herein will void the warranty.
Only a duly authorized representative of the manufacturer may open your
instrument. The unit should only be opened in a fully anti-static
environment. Failure to do so may damage the electronic components
and will void the warranty.
NOTE
The greatest care has been taken to manufacture and calibrate your
instrument. However, these instructions do not cover all possible
contingencies that may arise during installation, operation or
maintenance, and all details and variations of this equipment are not
covered by these instructions.
For additional information regarding installation, operation or maintenance
of this instrument, contact the manufacturer or your local representative or
distributor.
IMPORTANT
Please read this instruction manual before installing the unit, and
take note of the following precautions:
1.
Ensure that all incoming AC power and other power
sources are turned OFF
before performing any work
on the instrument. Failure to do so may result in
serious or even fatal injury and/or equipment damage.
2.
Before connecting the instrument to the power
source, check
the labels on the
side of the instrument
to ensure that your instrument is equipped with the
appropriate power supply voltage, input voltages,
currents, analog output and communication protocol for
your application.
