Satcube Ku User Manual v2.0-2019
SATCUBE PROPRIETARY
•
Satellite position the current
profile has active.
•
Satcube terminal IP where web GUI
can be reached for when using
automatic acquisition of IP. Usually
WIFI.
•
Last part shows Current software
version or an indication if a new
software update is available. In
Figure 17 the current software of
the terminal is seen 0.5.12 and by
pressing OK button a new software
update can be downloaded.
d)
Terminal Navigation
•
Proceed from waiting for GPS acquisition screen
o
Right arrow button
•
Show C/N or RQ value on screen
o
While in pointing screen press up arrow
•
Move to Home screen / Information screen
o
Click the home button (blue house) or right arrow. Click left arrow to return to
pointing screen
e)
Button functionality
Buttons described below can be seen in Figure 18.
▪
White Cog
: Long press turns on/off transmission.
▪
Blue House
: Brings user to home screen.
▪
C:
Long press turns terminal on and off. Short press clears
pointing data.
▪
OK
: Long press initiate beam switching procedure. Short
press is used to agree to dialogs.
▪
Up / Down arrow
: Short press shows / hides C/N and RQ value in pointing screen. Changes
satellite profile when in home screen.
▪
Right / Left arrow
: Short press switches between home screen and pointing screen.
▪
Holding Left arrow
on terminal startup initiates terminal factory default settings.
Figure 17 Home screen showing useful information.
Figure 18 Terminal buttons.
Summary of Contents for Ku
Page 1: ...Satcube Ku User Manual ...
