Configuration of the SAILOR 100 GX
LAN setup and cabling for management
In GX ADS “Bridge LAN3 to LAN1” on master and slave. The Master ACU can be
accessed on LAN port 1 & 3 IP:192.168.1.2 and the Slave ACU on LAN port 1 & 3
ip:192.168.1.102. Connect the management device to LAN 3 on slave. See Figure 3: GX
ADS LAN cabling.
1.3
Configuration of the SAILOR 100 GX ADS
1.3.1
Dual antenna mode
Prerequisites
Before setting up the dual-antenna system set the following items:
1.
Make a GX Modem profile configuration (on Master)
2.
Make a Satellite profile using the GX Modem profile (on Master)
3.
Make a Dual Antenna Master Modem profile (on Slave)
4.
Make a Satellite profile using Dual Antenna Master Modem profile (on Slave)
5.
Make an azimuth calibration for each antenna. This can be done by manually
entering GSC information.
6.
Make a Tx cable calibration for the Master antenna system and for the Slave
antenna system.
Figure 3: GX ADS LAN cabling
