Satamatics SAT-202 User Manual Download Page 15 | Manualshive

Page: 15 / 24

Satamatics SAT-202 User Manual Download Page 15

MAN-0034 Issue 1

SAT-202 Series User Manual

© Satamatics Ltd.

Page 15 of 24

6 FUNCTIONALITY

For full functional details on the SAT-202 contact your authorised dealer.

7 FACTORY DEFAULTS

The terminal is shipped with Factory Defaults set. When power is initially applied, the script timer,

alarm and operation definitions are cleared; the terminal then powers up, acquires the GPS position

and tunes to the best ocean region for the terminal location. Once the terminal has acquired the

IsatM2M satellite signal it transmits a single position report burst.

8 MAINTENANCE AND SUPPORT INFORMATION

8.1 Cleaning

Dust and finger marks can be removed using a soft damp cloth. Avoid using domestic cleaning

products.

8.2 Technical Support and Information

For technical support, product queries and information please contact your equipment supplier or

authorised dealer.

Authorised dealers and general information about Satamatics products and services can be found at:

http://www.satamatics.com

«
...
13
14
15
16
17
...
»

Summary of Contents for SAT-202

























Reviews:

No comments