16
DE
Betriebsanleitung SATAjet 1800 M
■
Zirkulationsleitung an Materialrücklaufanschluss anschließen.
■ Materialkanal mit geeigneter Reinigungsflüssigkeit durchspülen (siehe
10.2. Regelbetrieb
Vor jedem Einsatz folgende Punkte beachten / prüfen, um ein sicheres
Arbeiten mit der Automatikpistole zu gewährleisten:
■
Erforderlicher Druckluftvolumenstrom, Spritzluftdruck, Materialvolumen-
strom sowie Materialförderdruck sind gewährleistet.
■
Saubere Druckluft wird verwendet.
Materialmengendurchsatz einstellen
■
Erforderlichen Materialmengendurchsatz über den Materialförderdruck
einstellen.
Spritzstrahl einstellen
Hinweis!
Zur Einstellung der Zerstäubungsparameter und zur Reproduktion
von Einstellwerten empfehlen wir die Verwendung einer Prüfluftdüse
(Zubehör).
Bei Verwendung mit externer Rund- / Breitstrahlregulierung
■
Spritzstrahl durch entsprechenden Luftdruck über die Anschlüsse
Breitstahlregulierung
[4-12],
[5-5]
und Druckluftanschluss Rund
-
strahl
[4-6],
[5-7]
einstellen.
Bei Verwendung mit interner Rund- / Breitstrahlregulierung
■ Spritzstrahl durch Drehen der Rund- / Breitstrahlregulierung
[6-8]
einstellen.
Lackieren
Hinweis!
Beim Lackieren ausschließlich die für den Arbeitsschritt notwendige
Materialmenge verwenden. Beim Lackieren auf notwendigen Spritz-
abstand achten. Nach dem Lackieren das Material sachgerecht lagern
oder entsorgen.
■
Notwendigen Spritzabstand einstellen (siehe Kapitel 7.7).
Bei Verwendung mit externer Rund- / Breitstrahlregulierung
■
Erforderlichen Druckluftvolumenstrom für Druckluftanschluss Breit-
strahl
[4-12],
[5-5]
sicherstellen.
Summary of Contents for SATAjet 1800 M
