SATA jet 100 B F RP, Operating Instructions Manual, Page: 421 / 441

421
US
Operating Instructions SATAjet 100 B F RP/HVLP, B P Operating Instructions SATAjet 100 B F RP/HVLP, B P
6.4. Use In Explosive Areas
Ex-sign Equipment cat-
egory
Device category Gas category Temperature
classification
6.4.1 General
The paint spray gun is approved for the use / storage in explosive areas
of Ex-Zone 1 and 2.
Danger! Risk of explosion!
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the paint spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenized
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
7. Use
Danger! Risk of explosion!
• Use only solvent-resistant, antistatic, undamaged and technically
flawless compressed air hoses with a permanent pressure resistance
of minimum 10 bar / 145 psi, e.g. Art. No. 53090 !
Information!
The following requirements must be fulfilled:
• Use of a compressed air connection G 1/4 a or of a fitting SATA con -
nection nipple.
• Ensure minimum compressed air volume (air consumption) and pres-
sure (recommended spray gun inlet pressure) according to chapter 2.