SATA DY03001, Manual

Page: 18 / 32

DY03001 Users Manual
Use caution when working with voltage above 30V ac rms, 42V peak, or 60V dc. Such voltages
pose a shock hazard.
When using the probes, keep your fingers behind the finger guards on the probes.
When making connections, connect the black test lead before you connect the red test lead.
When you disconnect test leads, disconnect the red test lead first.
Remove the test leads from the circuit under test before you open the back cover.
Do not operate the meter with the back cover removed or loosened.
To avoid false readings, which could lead to possible electric shock or personal injury, replace
the button cells as soon as the low battery indicator ( ) appears.
To avoid electric shock, do not touch any naked conductor with your hand or skin, and do not
ground yourself while using the meter.
Remaining endangerment:
When a probe is connected to dangerous live potential, it is to be noted that this potential can
occur at the other probe!
CAT II - Measurement Category II is for measurements performed on circuits directly
connected to low voltage installation. ( Examples are measurements on household appliances,
portable tools and similar equipments. )
Do not use the meter for measurements within Measurement Categories III and IV.
●
●
●
●
●
●
●
●
●
-2-