SATA AE5822, User Manual

Page: 12 / 60

中文
EN DE RU KO PT JA ES AE5822
12
Overall dimension of the product:
Installation and operation:
Installation procedure:
1
）
First install 4 casters on the two underframe assemblies with bolts and washers.
2
）
Install the two underframe assemblies at the bottom of the pump body and ensure that the bolts and washers are effectively
tightened.
3
）
Install the bracket head on the piston rod of the pump body and lock it with bolts.
4
）
Install the safety plate, hook, eyebolt, and chain on the bracket head with bolts, washers, and wing nuts.
5
）
Loosen the filler vent nut before use. Raising procedure: 1
）
Move the bracket to the specified position, depress the pump pedal,
and raise the bracket head to the specified height as needed.
Lowering procedure:
1
）
Place the load in the center of the bracket at a balanced position and secure with a chain.
2
）
Turn the unloading valve stem
（
counterclockwise
）
to lower the bracket head. After that, restore the unloading valve stem.
3
）
Movement under load shall be slow and requires special care.
Maintenance:
1
）
After use, please lower the bracket head to the lowest position.