SATA 98104, Manual

Page: 8 / 16

EN 98104
8
中文
Product Features:
- High-precision tire pressure measurement
- High-brightness LCD backlight
- Thickened pneumatic rubber hose, stainless steel protective spring
- Rust-proof and durable copper connector
Operation Instructions:
- Remove the valve core cap, connect the inflation chuck to the valve core, and ensure no air leakage.
- Tire pressure detection: the measured in-tire pressure will be displayed once connected without the need to press the
trigger.
- Inflating operation: hold the trigger, and the inflator will inflate the tire.
- Deflating operation: Press the trigger halfway, and the tire will be deflated via the inflator.
- Energy-saving mode: the inflator will automatically shut down after 8 seconds not in use.
- Long press the button for two seconds to change units (BAR/PSI/KPA) under power-on state.
- Please change two AAA batteries if needed.
- Working Pressure 0-12 Bar, with the reading accuracy of 0.01Bar and maximum inlet pressure of 15Bar.
Important:
- To prevent personal injury, do not point the inflation chuck to any part of the body.
- Never exceed the maximum pressure of the tyre. Check that hose and chuck are in good condition with no damage or
cracks. Ensure safe working environment when using compressed air.
- Oil-water filter cotton should be changed based on actual usage. It is recommended to change every six months.
- SATA reserves the right to change the technical specifications of the product without prior notice.