SATA 51011C, Operation Instruction Manual

Page: 12 / 20

12
exposure, rinse it with water. In case of
splash into the eye, seek the medical
assistance. Liquid spilled from the battery
may cause the corrosion or burning.
General safety warning of electric tool -
repair
1) Have the qualified maintenance personnel
to repair the electric tool with the same
spare parts. This will ensure the safety of
the electric tool being repaired.
Professional requirements
1) Be sure to take out the battery pack
before repairing the machine.
2) Do not place the machine in the rain or
water
3) Do not store the battery pack above 40 °C.
4) Charge the battery from 0 to 30 °C,
preferably 18 to 24 °C.
5) Only use the accompanied charger and
battery pack.
6) Avoid the short circuit of battery pack (for
example: do not make the bolts and nails
touch the positive and negative poles of
battery pack)
7) Do not burn the battery pack or discard
it in the fire. Otherwise, an explosion may
occur.
8) Do not charge the damaged battery pack.
9) Replace the damaged power cord timely.
10) Be sure to pull the plug off before
removing the battery pack.
11) During the charging, it is normal for the
charger and battery pack to heat up.
12) When the machine is not in use, do not
insert the charged battery pack into the
charger.
13) After the charging is over, please pull the
battery pack off the charger immediately.
14) During the operation, it is normal for the
body and battery pack to heat up.
15) Do not put the discarded battery pack in
fire or dispose it with domestic garbage,
and be sure to send it to the local
collection station or recycling point.
16) Carefully check for the cable, natural gas
or water pipes before driving the screw
or drilling the hole in the wall, floor and
ceiling.
17) Wear the earmuffs when operating the
machine. Otherwise the hearing may be
damaged.
18) During the operation, it is normal for the
accessories and metal parts to heat up.
19) The operating machine may come into
contact with the hidden wires. Therefore,
be sure to hold the insulating surface
of machine. Contact with the live wires
may electrify the metal on the surface of
machine and cause an electric shock of
user.
Battery pack leakage may occur if the
operating temperature is too high or the pack
is excessively used. If the liquid leaking from
the battery gets on the skin, wash it with soap
first, then rinse it with lemon juice or vinegar.
In case of contact with the eyes, rinse the eyes
with clean water immediately and go to the
hospital for treatment.
Safety warning of charger:
1. Please read the instruction before use.
2. Only for indoors, no rain or water
3. Do not charge the non-rechargeable
battery.
4. The damaged power cord shall be replaced
by the professional technician from the
WARNING
51011C